Adding A Tray Ceiling

Place first plank flush against wall and nail into ceiling with a finishing nailer.

Adding a tray ceiling. Using wood planks wood beams or shiplap is another great way to add emphasis to a tray ceiling design. Chalk lines are snapped to guide placement of the ez tray. Tray ceilings have the main role of breaking up the ordinary flat ceiling line and adding variation in height in order to create an architectural look.

A feeling of spaciousness can be created by the look of the different levels and a tray ceiling can make a low ceiling look higher. Apply adhesive caulk to secure the bead in place. Turn it around and make the.

Staple the vinyl bead where it meets the lowered section. The basic purpose of a tray ceiling is to break up an ordinary flat ceiling line and add a variation in height to create architectural interest. The framing for the tray ceiling is.

If shooting into ceiling trusses use a stud finder and mark location of trusses with pencil. A tray ceiling also called an inverted or recessed ceiling resembles a large upside down tray set into a ceiling. Most people don t want to sacrifice height in standard size rooms to add tray ceilings.

Nail your new 2 by 2s to the wall along a level line and attach clips about every 18 inches along the top for the. Building the framing 1. Snap chalk to outline where the edge of the vinyl meets the upper level of ceiling.

If nailing into the drywall insert nails at a slight angle and apply a small amount of construction adhesive to back of each plank with a caulk gun. The center section is situated several inches or feet higher than the perimeter. Measure the length of the.