Removing Artex Ceiling

Removing artex from ceilings steam stripper tips.

Removing artex ceiling. The length of the project will depend on the amount of artex you want removed. Removing artex with an external product if you re looking for a faster solution to your artex removal you can use a water based coating remover such as x tex. No more than two trowels full should be placed on the hawk then cut into a small section of this with the trowel held at 90 degrees to the hawk.

Firstly by removing any obvious high spots or lumps with a scraper and then applying a bonding agent such as pva to the surface. As mentioned above do not use this method before your artex ceiling is given the. Apply to the ceiling wall using a hand held board hawk and a plasterers trowel.

Tilt the hawk towards you while pushing and scooping the trowel and plaster away. Some older artex may contain asbestos and it is extremely unwise to sand down or scrape without seeking the. Before beginning either procedure you must also make sure that the artex does not contain any traces of asbestos.

You can remove old artex by using a wallpaper steamer or a specialty removal product but either method can be very time consuming. Artex ceiling 5 easy ways to remove it complete uk guide method 1. Once this has dried you ll be able to plaster over the surface with a coat of multi finish plaster which will result in a perfectly smooth and flat wall or ceiling finish which you can decorate as you wish.

Apply two coats of pva solution to the existing artex. On average artex removal should take 2 4 hours for a professional and likely double that for a diy project. Scraping off artex is a tough job not to mention dangerous if it contains.

When the final coat of pva goes tacky trowel on the first coat of plaster flatten. Also the location can also affect timeframes with ceilings taking longer than walls.