Repairing Hole In Ceiling
Screw backer boards above the unsupported drywall ends of the enlarged hole and install the new patch photo 2.
Repairing hole in ceiling. How to fix holes in a ceiling method 1 of 3. Clean with a damp rag to. Then tape mud and skim coat the entire patch.
Apply a second and third coat of the compound over repairs then sand until smooth. Use a fine mist spray bottle or wet rag to add moisture to the edges of the hole if necessary. Apply drywall compound around the hole with a putty knife.
Cut a rectangle around the damaged area. Score the pencil lines around the hole with a sharp drywall knife. Cut out the square hole use a drywall saw to cut from inside the hole out to each corner of the square.
You ll also want to cut the piece a little smaller than the opening. Protect your eyes and mouth with safety goggles and a dust mask. Put on safety goggles and a dust mask.
Attach a patch piece to the cleats. Add wooden cleats behind each side for support. Cut a bit past the pencil mark at each corner to be sure the new drywall patch will fit easily without forcing.
Use screws or adhesive to attach the scrap piece of wood to the framing piece. Making drywall patches for large holes. Sand the patched area smooth to.